Eton Range of Glass Balustrades with Stainless Steel Posts

IF YOU HAVE ANY QUESTIONS ON THE ETON RANGE OF GLASS BALUSTRADES, PLEASE CONTACT US ON 01628 526995 OR SEND YOUR REQUIREMENTS TO US BY EMAIL (janmoorhouse@btconnect.com) OR FAX (01628 522541) OR TEL (01628 52699. PAYMENT WILL BE TAKEN BY CREDIT CARD.

Stainless Steel Posts and fittings come in two qualities. 304 Grade stainless steel is suitable for most ordinary internal and external uses, and 316 Marine Grade is recommended for outside areas within 5 miles of the sea or around swimming pools. Our ETON Solid Glass Balustrades are available with either a Stainless Steel or hardwood handrail. Eton balustrades are easy to assemble.

The stainless steel posts and rails have a 48.3 mm diameter.

For a Decking Balustrade over 600mm from the ground, consult with a reputable builder or structural engineer.

Assembly Instructions for Eton Range of Glass Balustrades.

1. The posts and handrail will be supplied to you pre-drilled. It is therefore necessary to tell us

a) The width of the glass that you require for each section. The width of glass is 50mm less that the distance between the posts. (This allows a 25mm gap between the glass and the post. This gap is required for the glass clamp.)

b) The height of the glass you require for each section. We need to know both the height you require and the distance of the glass from the deck. (This is required so that we can drill the hole in the posts for the clamps, such that if the glass were to slip, it would be supported by the top clamp.)

c) The overall height of the Balustrade. (This will allow us to cut the stainless steel posts to the correct height).

d) The width between the CENTRES of the posts for each section. The maximum distance between the posts should be 1.6m if there is a handrail, or 1.4m if no handrail.

e) A sketch of the whole Balustrade. We are unable to supply fittings for glass that over hangs the decking.

PLEASE EITHER FAX THIS INFORMATION on 01628 522 541 or email on jjanmoorhouse@btconnect.com.

This will allow us to quote a price to you, either for the stainless steel alone, or for both the glass and the stainless steel.

2. The glass and the Stainless Steel Posts and Fittings will arrive separately. You should allow around 3 weeks for the receipt of the glass as it is cut to your size and then tempered.

3. When glass and stainless steel has arrived, first erect the Stainless Steel Posts.

4. Remove the lugs from the glass clamps. These lugs are not required unless the glass over hangs the decking. In the event of the glass slipping, it will only slip to the deck level.

5. Assemble the glass and Glass Clamps.

6. Glue and/or screw the rail and supports to the posts.

Stainless Steel Posts and Handrail Units for ETON Balustrade (Unit Price ex. VAT)
	Satin Stainless Steel Upright Post welded onto base plate 120mm diameter. Diameter 48.3mm, height 1100mm. (Posts can be cut to a shorter height). Drilled for glass clamps. 304 Grade 48.3mm £80.37 316 Marine Grade 48.3mm £95.38		Satin Stainless Steel Cover Plate over Base Plate. Diameter 120mm. 304 Grade 48.3mm £15.06 316 Marine Grade 48.3mm £19.35
	Satin Stainless Steel Glass Clamps. Available for 10mm glass with rounded backs. Posts predrilled for these clamps. 304 Grade £13.05 316 Marine Grade £13.43		Satin Stainless Steel End Cap. Diameter 48.3mm. 304 Grade £5.92 316 Marine Grade £6.46
	Satin Stainless Steel Right Angle Elbow. 304 Grade 48.3mm £23.86 316 Marine Grade 48.3mm £30.94		Satin Stainless Steel Tube. Diameter 48.3mm. Maximum length 6000mm. Free cut to length. Price per part or full metre. 304 Grade 48.3mm £37.25 316 Marine Grade 48.3mm £42.29
	Satin Stainless Steel Corner Saddle Stem. For use with Iroko Hardwood Handrail (below). 304 Grade 48.3mm £13.98 316 Marine Grade 48.3mm £17.37		Satin Stainless Steel Straight Saddle Stem. For use with Iroko Hardwood Handrail (below). 304 Grade 48.3mm £13.98 316 Marine Grade 48.3mm £17.37
	Iroko Hardwood Handrail with 4 alternative ends. a) Dowelled and pegged for connecting to another handrail. b) Flat end for fitting wall socket. c) Dome End. d) Mitred at end for 90 degree corner. Dia 48.3mm, length 1800mm. End smoothed or turned to fit wall socket. £27.77 per metre		Universal Fitting for attaching Stainless Steel Rail. 304 Grade 48.3mm £1.23 316 Marine Grade 48.3mm £14.17
	Satin Stainless Steel Tube Connector. Diameter 48.3mm. 304 Grade 48.3mm £10.18 316 Marine Grade 48.3mm £15.89		Satin Stainless Steel Elbow. Diameter 48.3mm. For finishing a stainless steel rail at the post. 304 Grade 48.3mm £20.83 316 Marine Grade 48.3mm £26.92
	Satin Stainless Steel Wall Socket. Diameter 48.3mm 304 Grade 48.3mm £17.35 316 Marine Grade 48.3mm £20.46		Tube of glue for Stainless Steel £35.54
	Stainless Steel Cleaner £18.00

 

10mm TEMPERED Glass, polished all round (suitable up to 1.8 metres wide). Price inc. VAT - £110.00 per square metre. Free carriage on glass but there is an additional carriage charge for non mainland UK, Scottish Highlands and orders under 3 square metres. TO ADVISE YOU OF THE EXTRA CARRIAGE COST PLEASE Tel 01628 526995 or email janmoorhouse@btconnect.com