Scenic Installation


STEP 3 | Baluster Connectors

Measure and mark the center point between rail posts, both on the top and bottom rail.

Using a cordless drill, attach the first baluster with the stainless steel screws provided to the inside of the top and bottom rails. Turn screws only until rubber grommet starts to mushroom. Use caution not to over-tighten.

The current design of the Scenic balusters has only a 45 degrees angle on the top left hand corner and the bottom right hand corner of the Scenic balustrade, not as shown in the picture above.

next >>

 

 

 

Purchase Terms & Delivery
Contact ..
tel 0044 (0)1628 526995 fax 0044 (0)1628 522541
e.sales@haf1.org

logo