The DATCHET Range of Solid Glass Balustrades with Wooden Posts

Our Datchet Balustrades are easy to assemble. The tempered glass is attached to the Wood Posts by the Glass Clamps.

STAINLESS STEEL CLAMPS for the DATCHET RANGE of GLASS BALUSTRADES

Assembly Instructions for Datchet Glass Balustrades

1. Erect Wooden Newel Posts.

2. Measure distance between posts.

3. Deduct 4cm from the distance between the posts to calculate the width of the glass. (This allows a 2cm gap between the edge of the glass and the post. This gap is required for the glass clamps.)

4. Please note: the glass clamps have lugs in them. These are not required unless the glass overhangs the decking. In the event of the glass slipping, it will only slip to the deck level. We do not supply drilled glass for overhanging balustrades.

5. Measure height of glass that you require.

6. Place your order for Glass Clamps and glass.

7. The glass and Glass Clamps will arrive separately. You should allow around 3 weeks for the receipt of the glass as it is cut to your size and then tempered.

8. Remove the lugs from the glass clamps.

9. Screw the clamps to the wood post. In placing these clamps ensure that if the glass slipped to the deck level, that the top clamp will still support the glass.

10. Assemble the glass between the posts.

Stainless Steel Glass Clamp with straight back for 8 or 10mm glass. Unit Price ex VAT 304 Grade £9.31 316 Marine Grade £11.75

CARRIAGE ON GLASS CLAMPS
Free carriage on UK mainland orders for stainless steel clamps (ex. Scottish Highlands) over £75. £7 ex VAT on orders under £75.

8/10mm TEMPERED Glass, polished all round. Prices ex. VAT.

Free carriage on glass but there is an additional carriage charge for non mainland UK, Devon, Cornwall and Scottish Highlands.

WOODEN POSTS and HANDRAIL
We do not supply wooden posts or handrails. These are easily available from your local DIY store or timber outlet.